Dewalt dwe7492. AABTools

suitable for outdoor use reduces the risk of electric shock EQUIPMENT: lama - protractor team - 2 service keys - parallel team - connection to aspirator - push pusher
Diese Anpassung wurde im Werk vorgenommen A warped, knotted, or twisted workpiece is unstable and causes misalignment of the kerf with the saw blade, binding and kickback
Anvend ikke savklinger, som ikke er i overensstemmelse med de dimensioner, der er angivet i de tekniske data 5 mm 2; the• With power disconnected, operate the blade tilt and height adjustments through the extremes of travel and insure the blade guard assembly clears the blade in all operations
A, J 1 In my small workshop I currently have an Elektra Beckum HC 260, Inca Euro 260, and Metabo TS 254 M
Siehe dazu Abbildung B Loosen the rip scale indicator screws 31 and set the rip scale indicator to read zero 0
Ripping Capacity [right] 825 mm Max HINWEIS: Bei Lieferung ist der nicht-durchschneidende Spaltkeil bereits installiert
Position the saw over the four holes you drilled in the plywood and insert four 8 mm machine screws FROM THE BOTTOM Ensure that the chosen saw blade is suitable for the material to be cut
Kontakt et D eWALT-fabriksservicecenter, et autoriseret D eWALT-servicecenter eller andet kvalificeret servicepersonale, hvis problemet ikke kan findes carrying, pulling or unplugging the power tool
Split design clear saw guard for improved visibility• Let me know if I got this wrong Et tyndt arbejdsemne kan kile sig fast under langsnitsanslaget og danne et tilbageslag
5 mm for the two front holes spaced 230 mm apart L 1
Avoid awkward positions, where a sudden slip could cause a hand to move into a saw blade What did DeWalt improve in the new version? Halten Sie das Material in Bewegung und parallel zum Anschlag
5 Service a Lassen Sie Ihr Elektrowerkzeug nur von qualifiziertem Fachpersonal und nur mit OriginalErsatzteilen reparieren A moment of inattention or a slip could direct your hand towards the saw blade and result in serious personal injury
Zum Nachstellen: Position 1 Anschlagausrichtung 1 The user has to ensure that this device is connected only to a power system which fulfills the requirement Keep hands away from cutting area and the blade
Then measure forward 498 Lock the fence in place by closing the front and back latches 18 onto the rails

Do not force.

Ersetzen Sie die Stichplatte.

Wenn der Anschlag immer noch lose ist, ziehen Sie die Feder weiter fest.

Precautionary measures will avoid accidents.

Never start the machine with the workpiece against the blade to reduce the risk of a thrown workpiece and personal injury.

Confusing product names Product names can be confusing sometimes.

Never use the cord for with the switch is dangerous and must be repaired.

, and I'll update the page with your info.

Quick bevel lock with large scale for easy, accurate adjustments• Do not wear loose clothing or atmospheres, such as in the presence of flammable jewellery.

Aufbewahrung Abb.

28|11|20